FAQ

How to calculate pressure transducer PSI from 4-20mA output
Here is the formula for calculating pressure based on the value reading from 4-20mA pressure transducer: pressure = (current_reading - 4mA) * max_pressu...
Thu, Feb 27, 2020 at 1:44 AM
RAK 7258 Indoor LoRaWAN Gateway Firmware Upgrade
RAK gateways don't have remote management capabilities. But, it's pretty easy to upgrade the firmware yourself. Find the IP address of that gat...
Wed, Dec 9, 2020 at 4:00 PM
Debug No Connectivity Issue on Multitech Conduit LoRa Gateway (ethernet only version)
If the Multitech (ethernet-only) gateway completely stops connecting to the internet, not just our LoRa network server. Since this is an Ethernet-only gatew...
Wed, Dec 9, 2020 at 4:18 PM
Troubleshooting Pressure Triggered Switch on LSMP or CSMP Connected to GPI Inputs
Check the GPIx  mode setting for the GPI input the switch is connected to. To check it, download ZenConfig mobile app for iPhone or Android phone. (App ins...
Wed, Dec 9, 2020 at 4:35 PM
Ho do I know my CSMP/LSMP has connected to the network?
There are 3 methods to see the status of device connectivity: Use the mobile app Observe the device Status light flashes Check your application dashb...
Fri, Jul 2, 2021 at 3:36 PM
I received my Zenseio devices. What do I do next?
Please do to this link to get started and access documentation: https://zenseio.com/start
Fri, Jul 2, 2021 at 3:38 PM
What do the LED lights mean on Multitech Conduit IP67 gateways?
PWR should be solid green when the gateway is powered up. STATUS should blink after gateway's bootup initialization completion. L1 (aka LS - cellu...
Tue, Jul 6, 2021 at 3:59 PM